|Models||Chamber (mm)||O||Overall Dimensions (mm)||Capacity (kg/h)||Power||Foot-||Image|
|Pyro 84HE||200||1220||100||610||2030||670||1050||1380||70||45||15||9||1.2||Pyro 84HE|
|Pyro 105HE||250||1520||100||630||2340||670||1050||1380||115||90||35||15||1.5||Pyro 105HE|
|Pyro 106HE||250||1830||100||630||2640||670||1050||1380||195||140||55||24||1.7||Pyro 106HE|
|Pyro 128HE||300||2440||100||660||3520||670||1050||1380||275||185||80||34||2.2||Pyro 128HE|
|For imperial dimensions click here|
|Also special designs according to customers' specifications|
Precise control of temperature:
The ovens include top-of-the-line temperature controllers; very fast power switching through SSR devices for electric models (E models and HE models) or fast modulating motors for the gas-fired models (G models). The objective is to maintain set-point accuracy within a few degrees under varying loading conditions.
Precise control of time:
The Pyro comes (equipped as standard for E series and G series, optional on the HE series) with a digital closed-loop speed controller. Calibrated in inches of belt travel per minute, the closed loop acts like a cruise control on a car does. With a simple potentiometric controller, it maintains accurate cycle time regardless of the variations introduced by friction load and voltage. This is a very important feature since, on a 4 minute trip; a few seconds make a difference. This system is accurate to within 0.4 seconds on 4 minutes cycle time.
Heat transfer uniformity:
A high-precision oven needs to be uniform. Not only temperature-wise but also heat-transfer wise. Pyro uses convection as the primary source of heat transfer. The turbines, their number and position, the shape of the chambers and the conveyor are all designed to maximize the air velocity to the part in a uniform manner and all along the part path. This is what is meant by "heat-transfer uniformity."
Sufficient reserve power:
For quick recovery at start-up of a load.
Floor space saving:
Ovens can be as small as 10% the size of regular ovens. Because of the reduced size, they are also more energy-efficient.
Our top machines can process 16mm CrSi wire in 6 minutes total cycle at rates of 9,000 kg/hr.